Using a redial queue, 71 – Vertical Communications and FXT User Manual
Page 79
•
To scroll through numbers in your redial queue if your
telephone is currently idle,
1. SELECT Auto Redial OR the programmed AUTOMATIC
REDIAL button. The display shows the last number dialed.
2. Choose one of the following:
•
SELECT REMOVE to remove the number from the redial
queue.
•
SELECT NEXT to scroll to the next number in the queue.
•
SELECT EXIT to exit from the redial queue.
•
To interrupt the redialing procedure so that you can scroll
through numbers in your redial queue,
1. While your telephone is in the process of dialing a number,
SELECT Auto Redial or the programmed AUTOMATIC
REDIAL button twice. This treats the number as answered,
cancels automatic redialing for that number, and puts the number
back in the automatic redial queue. The display shows the last
number dialed.
2. CHOOSE from one of the following:
•
SELECT REMOVE to remove the number from the redial
queue.
•
SELECT NEXT to scroll to the next number in the queue.
•
SELECT EXIT to exit from the redial queue.
•
To cancel the automatic redial feature, choose one of the
following:
1. PERFORM any user activity at the station (go on-hook, select
the speaker button, etc.),
2. DIAL
#72
to delete all numbers from the redial queue,
3. SELECT Auto Redial or the programmed AUTOMATIC
REDIAL button while the number you wish to remove from the
redial queue is ringing.
Large Screen Display Speakerphone Station User’s Guide
71
GCA70-349
Other Advanced Features