Vertical Communications and FXT - Manual (Page 67)

6. SELECT EDIT.
7. Make your speed dial route selection choice
from the list on the LCD by pressing the appro-
priate button.
• PRESS line button to select outside line,
• DIAL
00
to select prime line or last line
used.
• DIAL
01
to
16
to select line
group.
• PRESS INTERCOM button or dial
8
to se-
lect intercom.
NOTE: You may need a pause between numbers to compensate for differ-
ences in response time between your system and the host system (ask your
attendant about this). To store a pause, press HOLD, then continue dialing. If
your system is behind a host system that needs a hookflash to access a
feature, press TAP to store a hookflash, then continue dialing.
8. DIAL number (up to 16 digits long, include *
and # if needed).
9. SELECT DONE to store the number.
10. REPEAT previous steps until all numbers are
stored, OR SELECT EXIT.
11. PRESS SPEAKER to end.
Large Screen Display Speakerphone Station User’s Guide 59
GCA70-349 Programming
Select Line
Select Line Group
Select Prime/Last Line
Select Intercom
ARS
PREV EXIT
Selecting Line or Intercom
0123456789*#
Pause (p)
Flash (f)
ERASE DONE ENTER
Dialing a Speed Number