Vertical Communications and FXT - Manual (Page 72)

Programming of the feature access buttons may require several selections
involving many LCD screens. If an abbreviation used is not familiar to you,
consult Appendix B, Display Abbreviations on page 93.
• To create a feature access button,
1. SELECT OPTIONS.
2. SELECT Programming.
3. SELECT NEXT until the Feature Button option appears.
4. SELECT Feature Button.
5. SELECT the Feature Level interactive button
to toggle between 1 and 2.
6. SELECT one of the three options.
• Show Empty Locations - green lights
• Show All Locations - red lights
• Feature Level
7. SELECT the button you want to assign as a
feature button.
8. SELECT the feature you want to assign to by
SELECTING the corresponding interactive
button. (SELECT NEXT to scroll through the
list of available feature.
9. REPEAT steps 1 through 7 for other features.
10.SELECT EXIT to end programming.
• To clear a feature button assignment,
1. REPEAT the above procedure, but SELECT CLEAR before
selecting storage location button.
Programming GCA70-349
64 Large Screen Display Speakerphone Station User’s Guide
HOLD EXIT
PARK
Show Empty Locations
Show All Locations
Select Feature Location
Feature Level 1
PREV
Selecting a Feature