Vertical Communications and FXT - Manual (Page 41)

Camping On - Busy Station,
Automatic Callback
If you call another station and receive a busy signal or a Do Not Disturb tone, you
can press a button that will cause the system to ring your telephone when the station
is available. This is called “camping on at a station.” Please note that you can camp
on to only one station at a time.
• To camp on at any busy station,
1. SELECT Camp-On.
2. Your telephone immediately hangs up. When
the station you called becomes available, your
telephone will ring with five short tone bursts.
• When you hear five short tone bursts,
1. PRESS INTERCOM OR SELECT Answer.
The other telephone will start ringing.
NOTE: If you do not press INTERCOM after the ring back tones within the
time limit set by the installer, the call back is canceled.
• To cancel the call back before your
telephone sounds the tone bursts,
1. PRESS INTERCOM AND DIAL
#6
OR
SELECT CLEAR .
• To camp on at a station with a Do Not
Disturb condition set,
1. SELECT Camp-On. A call back will occur
when called station is no longer set in the Do
Not Disturb mode.
Large Screen Display Speakerphone Station User’s Guide 33
GCA70-349 Making Calls
Wednesday 19 11:36am
J Doe Ext 321 Is Busy
CAMP On
Voice Mail Message
Wednesday 19 11:36am
Camp-On J Doe
VMAIL OPTIONS
CLEAR