Warning, Customer responsibility, Maintenance schedule – Craftsman 316.350840 User Manual

Page 15: Maintenance checklist 1 after, Each use, Hours of opera, Tion, 1 ^ i

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

MAINTENANCE SCHEDULE

Perform these required maintenance procedures at the fre
quency stated in the table. These procedures should also
be a part of any seasonal tune-up,

NOTE: Maintenance, replacement, or repair of the

emission control devices and system may only be

performed by a Sears or other qualified service
dealer.

NOTE: Maintenance, replacement, or repair of the emis

sion control devices and system may be per
formed by a Sears or other qualified service dealer.

WARNING:

To prevent serious
injury, never perform

maintenance or repairs with unit running.
Always service and repair a cool unit.
Disconnect the spark plug wire to ensure that
the unit cannot start.

A good preventive maintenance program of regular inspection and care will increase life and improve performance of your
chain saw. This maintenance checklist is a guide for such a program.
Cleaning, adjustment, and part replacement may be required, under certain conditions, at more frequent intervals than
those indicated.

CUSTOMER RESPONSIBILITY

MAINTENANCE CHECKLIST

AFTER

EACH USE

HOURS OF OPERA-

TION

.............................. „„nlliimn,

;........ 10...................... ,mn„2S,n,mn,mnJ

CHECK FOR LOOSE SCREWS/

NUTS/BOLTS

ii/

CLEAN OR REPLACE THE AIR FILTER

1 ^

REPLACE SPARK PLUG
REPLACE OIL / FUEL FILTER

CLEAN, INSPECT SPARK PLUG
ARRESTOR SCREEN / MUFFLER

nil.

CHECK GUIDE BAR AND CHAIN OIL,

FUEL HOSES

CLEAN UNIT AND INSPECT DECALS

1 ^ i

CHECK CHAIN BRAKE® COMPONENTS

CLEAN GUIDE BAR GROOVE

............

/....................

CHECK FOR DAMAGED / WORN PARTS

CHECK CHAIN TENSION

CHECK CHAIN SHARPNESS

LUBRICATE SPROCKET TIP

CHECK FUEL MIXTURE