Craftsman 917.38919 - Manual (Page 4)

nTTREBlOVE LAWN IMOWER FftOM CARTOW
Remove loose parts included with mower
• Cut down two end comers of carton and lay end panel down flat.
Roll lawn mower out of carton and check carton thoroughly for additional loose
parts. ________
Read these instructions and this manual in its entirety before you attempt to
assemble ot operate your new lawn mower. Your new lawn mower has been
assembled at the tfie factory with exception of those parts left unassembled for
shipping purposes. All parts such as nuts, washers, bolts, etc,, necessary to
complete the assembly have been placed in the parts hag. To ensure safe and
proper operation of your lawn mower, ail parts and hardware you assemble must be
tightened securely. Use the correct tools as necessary to ensure proper tightness.
Handles
ЬалсИа
collar
/
n
Ш
4^
%
To Unfold Handle.
ÍMPORTANT; Unfold handles carefully
so as not to pinch or damage control
cablas.
Lower Handles
1 „ Insert lower handles into deck (A1)
2. Push handle firmly down unü! the
handle collar is located securely Into
the deck (A2).
3 . Insert screws into holes and using a
pozidrive screwdriver tighten fully into
deck (A2).
Handle Adjusters fiued to product (B)
1 Adjust handle assembly to the most
comfortable operating position and
tighten handle adjuster knob (B) on
both sides of the product,.
To insert the Brake Cable
1 insert cable into hole In Operator
Presence Control lever from the insida
of the !ever.(D
1 ).
2 . Lock into position. (D2)
3 . Rt the cables to the handles with the cable
ties provided, rnaking sure fire cables ana
not trapped between file handles.
Recoil Starter
1. Disconnect the spark plug lead.
2. Pull the Operator Presence Control
lever to release the brake on the
engine.
3 . Extend the puli cord fully (Cl). _
4. Locate the cord in the puli cord guide
positioned on handle (C2).