Symbols, Features – Craftsman 911041 User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SYMBOLS
Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper Interpretation
of these symbols will allow you to operate the tool better and safer,
SYMBOL NAME DESIGNATION/EXPLANATION
Wet Conditions Alert
Do not expose to rain or use In damp locations.
©
Read The Operator’s Manual
To reduce the risk of Injury, user must read and understand
operator’s manual before using this product.
o
Eye Protection
Always wear safety goggles or safety glasses with side shields,
or a full face shield when operating this product.
A
Safety Alert
Precautions that Involve your safety.
FEATURES
PRODUCT SPECIFICATIONS
Charger Voltage............................................................................................................................................... 7,2 Volt - 24 Volt DC
Charger Input..................................................................................................................................................120 V, 60 Hz, AC only
Charge Rate..............................................................................................................................................................................1 hour
Cord Length...................................................................................................................................................................................6 ft.
4-1/2 in.
KNOW YOUR CHARGER
See Figure 1.
Before attempting to use this product, familiarize yourself
with all operating features and safety rules,
“KEY HOLE” HANGING
The charger has a “key hole” hanging feature for convenient,
space-saving storage. Screws should be Installed so the
center distance Is 4-1/2 In,
LED DISPLAY
The LED lights located next to each battery port Indicate
the charge status of each battery,
THERMAL PROTECTION
Your charger has a thermal protection system that
prevents charging batteries that are too hot, which could
CAUTION
Do not use any DC to AC
power
inverters. Charger will be
Damaged!
Fig, 1