Craftsman 580.752300 - Manual (Page 14)

PRODUCT SPECIFiCMiONS
Pressure Washer Speoifieations
Pressure....................................... 3,800 PSI
Flow Rate..................................... 4.0 GPM
Detergent Mix................................ Use as directed
Water Supply Temperature................Not to exceed 100°F
Pump Oil Capacity.......................... 12 fl. oz. (0.35 !)
Engine Speoifioaliins
Rated Horsepower .......................... 13 at 3600 rpin
Bore ............................................ 3.5 in. (88 mm)
Stroke........................................... 2.5 in. (64 mm)
Displacement ................................. 23.7 in. (389 cc)
Spark Plug
Resistor..................................... NGKBPR6ES
Set Gap To:................................. 0.028-0.031 In (0.70-0.8(
mm)
Intake Valve Clearance .................... 0.15 ± 0.02 mm (cold)
Exhaust Valve Clearance.................. 0.20 ± 0.02 mm
(cold)
Fuel Capacity ................................. 1.72 Gallons
Oil Type........................................SAE10W-30
This pressure washer is rated in accordance to the Pressure
Washer Manufacture Association (PWMA) standard PW101
(Testing and Rating Performance of Pressure Washers).
OWNER’S RESPONSIBILITIES
Follow the hourly or calendar intervals, whichever occurs
first. More frequent service is required when operating in
adverse conditions noted below.
Maintenance Schedule
Hrsf ?(i Hcofir.
Change engine oil
EVervBiHOMfsorDaf^
Check/clean water inlet screen’
Check high pressure hose
Check detergent siphoning hose
Check spray gun and assembly for leaks
Clean debris
Check air filter
Check engine oil level
Ef/eryl SO: Hours Dr 3-: T^onths ^
Clean air filter^
ÉV:ery1Ì:0,0:Hofirs(OTO(&Tpnìhs:'
Change engine oil
* Clean sediment cup
* Check/adjust spark plug
* Service spark arrester’
Clean fuel tank and filter
Ewr-rv ?ijU Houi's or 3 tVicusiis
Change pump oil’
Evr-iy Hoisrs or Vfiariy
Replace air filter’’
Replace spark plug
Check adjust idle speed'*
Check adjust valve clearance'*
Every 5Ù0 Hciirs
Clean cumbustion chamber’
Every ;2( Years;:
Check fuel tube (replace if necessary)’
Clean if clogged. Replace if perforated or torn.
Service more often under dirty or dusty conditions.
Replace paper element only.
These items should be serviced by your servicing dealer.
Change after first 50 hours of operation and then every 200 hours or 3 months,
whichever occurs first.
14