Craftsman 315.113911 - Manual (Page 9)

MAINTENANCE
WARNING; When servicing, use only identical
Craftsman replacement parts. Use of any
other part may create a hazard or cause product
damage.
WARNING: Do not at any time let brake fluids,
gasoline, petroleum-based products, penetrating
oils, etc. come in contact with plastic parts. They
contain chemicals that can damage, weaken or
destroy plastic.
Do not abuse power tools. Abusive practices can
damage tool as well as workpiece.
JUhl^ WARNING: Do not attempt to modify
this worklight or create accessories not
recommended for use with this worklight. Any
such alteration or modification is misuse and
could result in a hazardous condition leading to
possible serious personal injury.
BULB REPLACEMENT
See Figures 4 & 5.
When purchasing replacement buib, request recom­
mended part number 780115002. See Figure 5.
TO REPLACE BULB:
■ Remove battery pack from worklight.
See Figure 2.
■ Depress button located on top of len cover then
pull lens cover to remove.
■ Remove old buib from spring by twisting bulb in a
clockwise direction.
■ Insert new buib in spring by twisting bulb in a
clockwise direction.
■ Replace lens cover aligning tabs inside lens cover
with slots on housing then snap into place.
■ Replace battery pack.
Note: For your convenience, your worklight has a bulb
storage area to store an extra bulb. See Figure 5.
DEPRESS
BUTTON
LENS COVER
PULL LENS
COVER FORWARD
TO REMOVE
BUTTON BULB
STORAGE AREA
Fig. 4
Fig. 5