Craftsman 315.175000 - Manual (Page 5)

PRODUCT SPECIFICATIONS
Depth of cut
Collet
Horsepower
Rating
0-1-1/2 in.
1/4 in.
1-1/2
120 volts, 60 Hz, AC only
Amperes
No load speed
Power cord
Net weight
25,000 RPM
10 ft.
8.13 lbs.
8
UNPACKING
Your router has been shipped completely assembled.
Inspect it carefully to make sure no breakage or
damage has occurred during shipping. If any parts are
damaged or missing, contact your nearest Sears
Retail Store to obtain replacement parts before
attempting to operate router. A wrench and this
Owner's Manual are also included.
WARNING: If any parts are missing, do not
operate this tool until the missing parts are
replaced. Failure to do so could result in possible
serious personal injury.
ACCESSORIES
THE FOLLOWING RECOMMENDED ACCESSORIES ARE
CURRENTLY AVAILABLE AT SEARS RETAIL STORES.
Template Guide Bushing
COMBI­
NATION
PANEL
CUTTER
VEINING
BIT
1
CORE BOX
BIT
V-QROOVE
CHAMFER
STRAIGHT
FACE
BIT
COMB­
INATION
STRAIGHT,
BEVEL
CUTTER
HINGE
MORTISING
BIT
DOVETAIL
CUTTER
BITS
I »CARBIDE TIPPED BITS "j
RABBET
BIT
□
OGEE,
ROMAN 0
SP
COVE
BIT,
45°
CHAMFER
BIT
UD
BEAD
QUARTER-
ROUND
BITS
ARBOR
2589
1
vifmi2
BALL
BEARINGS
(1/2 IN. &
SSM.)
*25895
*25895 FOR CARBIDE TIPPED EDGE FORMING BITS
2569 FOR HIGH SPEED STEEL EDGE FORMING BITS
^1^ WARNING: The use of attachments or accessories not listed above might be hazardous.