Assembly, Safety notice, Chain brake – Craftsman 358.351810 User Manual
Page 6: Spark arresting screen, Standards, Carton contents
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

This unit is not equipped with an anti
vibration system and is intended for
occasional use only,
SAFETY NOTICE;
Exposure to vibra
tions through prolonged use of gasoline
powered hand tools could cause biood
vessel or nerve damage in the fingers,
hands, and joints of people prone to
circulation disorders or abnormal swell
ings. Proîonged use in coîd weather has
been linked to blood vessel damage in
otherwise healthy people, if symptoms
occur such as numbness, pain, loss of
strength, change in skin color or texture,
or loss of feeling in the fingers, hands, or
joints, discontinue the use of this tool
and seek medical attention. An anti-vi
bration system does not guarantee the
avoidance of these problems. Users
who operate power tools on a continual
and regular basis must monitor closely
their physical condition and the condition
of this tool.
CHAIN BRAKE:
if this saw is to be
used for commercial logging, a chain
brake is required and shall not be re
moved or otherwise disabled to com-
piy with Federal OSHA Regulations for
Commercial Logging.
SPARK ARRESTING SCREEN:
Your
saw is equipped with a temperature
limiting muffler and spark arresting
screen which meets the requirements
of California Codes 4442 and 4443.
Ail U.S, forest land and the states of
Caiifornia,
Idaho,
Maine,
Minnesota,
New
Jersey,
Oregon,
and
Washington
require by law that many internal com
bustion
engines
to
be
equipped
with a
spark
arresting
screen.
If
you
operate
a chain saw in a state or locale where
such
regulations
exist,
you
are
legally
responsible
for
maintaining
the
operat
ing condition of these parts. Failure to
do so is a violation of the law. Refer to
the
Customer
Responsibilities
chart
in
the MAINTENANCE section.
STANDARDS:
This chain saw is listed
by Underwriters Laboratories, Inc. in ac
cordance with American National Stan
dards for Gasoiine-Powered Chain
Saws Safety Requirements (ANSI
B175,1-2000).
ASSEMBLY
^WARNING: Before using chain
saw, ensure al fasteners are secure,
CARTON CONTENTS
Check carton contents against the fol
lowing 1st.
Mode! 358.351810
• Chain saw (fully assembled)
• 2-cycle engine oil
Examine parts for damage. Do not use
damaged parts.
If you need assistance or find that parts
are missing or damaged, please cal!
1-800-235-5878.
NOTE:
It is normal to hear the fuel filter
rattle in an empty fue! tank.
Your unit has been factory tested and
the carburetor precisely adjusted. As a
result you may smell gasoline or find a
drop of oil/fue! residue on the muffler
when you unpack the unit,
ASSEMBLY
Your saw is fully assembled; no
assembly is necessary.