Operation – Craftsman C944.511601 User Manual

Page 6

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

OPERATION

KNOW YOUR BLOWER ATTACHMENT

READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
BLOWER ATTACHMENT. ComparG the illustrations with your unit to familiarize

yourself with the location of the various controls and adjustments. Save this

manual for future reference.

Blower Discharge

Opening

Air Intake Opening

Hanger

OPERATING THE COUPLER

Your powerhead is equipped with a

coupler which enables optional attach
ments to be installed. The optional at

tachments are:

Edger............... ..

71-51157

Cultivator...................... 71-51158
Pruner........................... 71-51161
Brushcutter* ............... 71-51159

*not designed for use with electric

powerheads

WARNING:

Always disconnect

powerhead spark plug (or disconnect
powerhead from power source) before
removing or installing attachments.

REMOVING ATTACHMENT
CAUTION:

When removing or instal

ling attachments, place the unit on a

flat surface for stability.

. Loosen the coupler by turning the

knob counterclockwise.

Upper Shaft

DOSEN

TIGHTEN

2. Press and hold the locking/release

button.

Locking/Release

Button

^ Coupler

Lower Attachment

Upper Shaft

While securely holding the upper

shaft, pull the attachment straight
out of the coupler.