Craftsman 358.792440 User Manual

Page 10

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

KNOW YOUR BRUSHCUTTER ATTACHMENT

READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
BRUSHCUTTER ATTACHMENT. Compare the illustrations with your unit to familiarize

yourself with the location of various controls and adjustments. Save this manual for
future reference.

BLADE

The BLADE is designed for cutting
grass, weeds, and brush up to 1/2 inch

in diameter.

TRIMMER HEAD

The TRIMMER HEAD holds cutting line

and is designed for cutting grass and
light weeds-

BLADE SHIELD

The BLADE SHIELD provides protection
from the spinning blade.

TRIMMER SHIELD

The TRIMMER SHIELD provides protec
tion from the spinning trimmer head.

OPERATING THE COUPLER

Your powerhead is equipped with a

coupler which enables optional attach
ments to be installed. The optional at

tachments are:

Edger.......................... 358.792400
Cultivator..................... 358.792410
Blower........................ 358.792421

WARNING:

Always disconnect

powerhead spark plug before remov
ing or installing attachments.

REMOVING BRUSHCUTTER AT

TACHMENT {OR OTHER OPTIONAL
ATTACHMENTS)

CAUTION: When removing or instal
ling attachments, place the powerhead
and attachment on a flat surface for
stability.

1. Loosen the coupler by turning the

knob counterclockwise.

Upper Tube

Coupler

Lower

Attachment

TIGHTEN ’' Knob

2. Press and hold the locking/release

button.

Locking/Release
Button

Coupler]

Lower Attachment

Upper Tube

While securely holding the upper
tube, pull the attachment straight
out of the coupler.