Craftsman 358.799380 - Manual (Page 8)

OPERATION
KNOW YOUR ELECTRIC BLOWER
READ THIS OPERATOR'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
UNIT, Compare the illustrations to your unit to familiarize yourself with the location
of the various controls and adjustments, Save this manual for future reference.
Top Handle
Blower Tube
Upper Vacuum Tube Lower Vacuum Tube
Nozzle
The ON/OFF SWITCH is used to acti­
vate the motor.
The INLET COVER LATCH Is used to
Open and close the inlet cover.
The NOZZLE is designed to direct the
flow of air.
OPERATING INSTRUCTIONS
STOPPING YOUR UNIT
Slide the ON/OFF switch to the OFF
position.
STARTING YOUR UNIT
Your unit has two run positions, LOW
and HIGH. Slide the switch to one of
these positions to turn on the unit.
^ WARNING : Do not use the unit
without the blower lubes, or collection
bag properly attached to avoid flying
debris and/or impeller contact which
can cause serious injury. Always wear
eye protection to prevent rocks or de­
bris from being blown or ricocheting
into the eyes and face which can result
in blindness or serious injury.
USING YOUR UNIT AS A BLOWER
Use your unit as a blower for;
• Sweeping debris or grass clippings
from driveways, sidewalks, patios,
etc,
• Blowing grass clippings, straw, or
leaves into piles, or rennoving debris
from corners, around joints, or be­
tween bricks.
Direct airflow by directing the nozzle
down or to one side. Always work
away from solid objects such as walks,
large stones, vehicles, and fences.
Clean corners by starting in comers
and moving outward. This will help
prevent an accumulation of debris
which could fly into your face.
Be careful when working near plants.
The force of the air could damage
tender plants.
Blower Operating
Position