Craftsman 320.17217 User Manual

Page 15

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

TROUBLE SHOOTING

PROBLEM

CAUSE

SOLUTION

The drill does not start

when trigger switch is
squeezed

Check to be sure power

cord is connected to

power source and that
power source (outlet) is

operable

Connect to power

source.

Confirm power source
(outlet )is operable

Will not drill

Check drill bit and chuck

jaws

Replace drill bit if dull or

worn; tighten chuck jaws

to firmly secure drill bit

Motor overheating

Be sure cooling vents

are free from dust and
obstacles

Clean, clear vents.

Do not cover with hand

during operation

17217 Manual_Revised_09-0708

Page 15