Craftsman 1450 Series Engine - Manual (Page 31)

Parts Li
L
Craftsman Chipper Shredder Model No. 247.77638
777S33113 777S33200
“ROTATING CUTTING BLADES. KEEP HANDS AND
FEET OUT OF OPENING WHILE MACHINE IS
RUNNING.
•DO NOT OPERATE THIS MACHINE UNLESS THE
CHUTE DEFLECTOR HAS BEEN PROPERLY
INSTALLED AND IS SECURED WITH THE HAND
KNOBS.
Operation Of This Equipment May Create
Sparks That Can Start
Fires Around Dry
Vegetation. A Spark Arrestor May Be
Required. The Operator Should Contact
Local Fire Agencies For Laws Or Regula­
tions To Fire Prevention Requirements.
777S30185
777X43688
DOiOT
USE E85 0RFUEL
CONTAMiG MORE
THA110% ETHAiOL
0 NOT DEPOSIT
ATERIAL LARGER THAN
1/2" DIAMETER IN LARGE
SHREDDER HOPPER.
THIS MAY DAMAGE
MACHINE.
777S30181
ROTATING CUTTING BLADES.
KEEP HANDS AND FEET OUT
OF OPENINGS WHILE MACHINE
IS RUNNING.
777S32282
I DO NOT OPERATE THIS MACHINE
I UNLESS THE CHUTE DEFLECTOR
^AS BEEN PROPERLY INSTALLED.
5
ÄJ
777D12676
3-WAY CHIPPER SHREDDER
HARDENED STEEL CHRDMIUM CHIPPER BLADES
10:1 REDUCTIDN RATID
J
777S32036
TO AVOID SERIOUS INJURY:
' Read the operator's manual(s) before starting and
using unit.
’ Keep all shields and guards in place and securely
attached.
' Keep hands, feet, face, clothing and long hair out of
Shredder Hopper, Chipper Chute and Discharge
Chute while the engine is running. Rotating cutting
blades inside these openings will cause serious
personal injury if contacted. Material being processed
may bounce back from inlet openings or be thrown
from the discharge chute. Long hair or loose clothing
may be pulled or sucked into the inlet openings.
' Do not place branches over 1/2 inch diameter into
the large Shredder Hopper. Branches over 1/2 inch in
diameter should be placed in the Small Chipper
Chute.
' If the chipped shredder jams or becomes clogged,
immediately shut off the engine and wait for all
moving parts to come to a complete stop before
clearing.
' Do not install, remove, adjust, or service the
discharge screen or any other part while the engine
is running. Blade contact can occur.
777S32037 •
TO AVOID SERIOUS INJURY:
* Do not operate on uneven ground where unit is
unstable. Do not operate on pavement, gravel or
other hard surfaces since objects can ricochet
and cause injury.
* To avoid a fire hazard, keep leaves, grass, and other
combustible materials away from hot engine and
muffler.
• Keep children and others away from area of
operation.
• Wear approved safety glasses, gloves and ear
protection.
31