Recoil starter handle, Throttle control, Ik warning – Craftsman 247.29931 User Manual

Page 10: Choke control, Meets ansi safety standards, Operation

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

OPERATION

Now that you have set up your tiller tor operation, get aquainted with its

controls and features. These are described on the next two pages and

illustrated on this page. This knowledge will allow you to use your new

equipment to its fullest potential.

RECOIL STARTER HANDLE

This handle is used to start the engine. See Figure 5.

THROTTLE CONTROL

The throttle control is located on the front of the engine. It regulates the

spread of the engine and will shut off the engine when moved into the

STOP position. See Figure 5.

ik WARNING

The operation of any tiller can result in foreign objects being thrown

into the eyes, which can damage your eyes severely. Always wear the

safety glasses provided with this unit or eye shields before tilling and

while performing any adjustments or repairs.

CHOKE CONTROL

The choke control is activated by moving the lever to the CFIOKE

position. Activating the choke control closes the choke plate on the

carburetor and aids in starting the engine.

Meets ANSI Safety Standards

Craftsman Tillers conform to the safety standard of the American National Standards Institute (ANSI).