Parking brake/cruise control lever, Awarning, Fuel level indicator – Craftsman PGT9000 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
![background image](/manuals/632115/15/background.png)
KNOW YOUR MOWE
J
PTO / BLADE ENGAGE KNOB
Activating the PTO engages power to the cutting
deck or other (separately available) attachments.
Pull outward on the PTO/Blade Engage knob to
activate it. Push the PTO/ Blade Engage knob
inward to disengage the power to the cutting
deck or other (separately available) attachments.
NOTE: The PTO/Blade Engage knob must be in
the disengaged (OFF) position when starting the
engine.
PTO
S
o
füTi
O I
OFF ON
PARKING BRAKE/CRUISE CONTROL LEVER
Located in the center of the tractor's dash panel below
the steering wheel, the Parking Brake/Cruise Control
lever is used to engage the parking brake and the cruise
control. Refer to the Operation section of this manual for
detailed instructions regarding the parking brake.
NOTE: The parking brake must be set it the operator
leaves the seat with the engine running or the engine
will automatically shut off.
NOTE: Cruise control can NOT be engaged at the
tractor's fastest ground speed. If the operator should
attempt to do so, the tractor will automatically decelerate
to the fastest optimal mowing ground speed.
AWARNING
Never leave a running machine unattended. Always disengage PTO
(Blade Engage knob), set parking brake, stop engine and remove key
to prevent unintended starting._ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
FUEL LEVEL INDICATOR
The Fuel Level Indicator is located on the left side of the tractor's
dash and indicates the amount of fuel in the gas tank.
15