Craftsman 315.114071 - Manual (Page 6)

SYMBOLS
Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper
interpretsiion of these symbols will allow you to operate the tool better and safer.
SYMBOL NAME DESIGNATION/EXPLANATION
Volts Vdtage
Amperes Current
Hz Hertz Frequency (cycles per second)
min Minués Time
a- Alternating Current Type or a characteristic of current
Direct Currert Type or a characteristic of current
No Load Speed Rotational speed, at no load
.../min Revolutions or Reciprocation Per Minute
Revolutions, strokes,
surface speed, orbits etc. per minute
Safety Alert Symbol
Indicates danger, warning or caution,
It means attention!!! Your safety is
Involved.
Wet Conditions Alert
Do not expose to rain or use in damp
locations.
Hot Surface. Do Not Touch
This decal indicates HOT SURFACE.
DO NOT TOUCH. Keep all body parts
away from all hot surfaces.
The purpose of safety symbols Is to attract your atteition to possible dangers. The safety symbols, and the
explanations with them, deserve your careful attention and understanding, The safety warnings do not by
themselves eliminate any danger. The instructions or warnings they give are not sub^itutes for proper accident
prevention measures.
SYMBOL MEANING
A
DANGER; Failure to obey a safuy warning will result in serious Injury to yourself orto others. Always
follow the safety precautions to reduce the risk of fire, electric shock and personal injury.
A WARNING : Failure to obey a safety warning can result In serious Injury to yourself or to others.
Always foltow the safety precautions to reduce the risk of fire, electric shock and personal Injury,
A
CAUTION; Failure to obey a safety warning may result in properly damage or personal Injury to
yourself or to others. Always follow the safety precautions to reduce the risk of fire, electric shock and
personal injury.
NOTE: Advises you of information or instructions vital to the operation or maintenance of the equipment.