Craftsman 917.293300 - Manual (Page 7)

INSERT CABLE CUP
® insert plastic cable clip into hole on the
back of handle column. Push cables
into clip.
CONNECT SHIFT ROD
® Insert end of shift rod farthest from bend
into hole of shift lever indicator.
» Insert hairpin clip through hole of shift
rod to secure.
® Insert other end of shift rod into hole in
shift lever.
» Insert second hairpin clip through hole of
shift rod.
REMOVE TILLER FROM CRATE
® Adjust handle assemby to lowest posi­
tion. Be sure lock lever is tightened
securely.
® Make sure shift lever indicator is in “N"
(neutral) position.
-o Tilt tiller forward by lifting handle.
Separate cardboard cover from leveling
shield.
® Rotate tiller handle to the right and pull
tiller out of carton,
CHECK TIRE PRESSURE
The tires on your unit were overinfiated at
the factory for shipping purposes. Correct
and equal tire pressure Is important for
best tilling performance.
» Reduce tire pressure to 20 PS I.
HANDLE HEIGHT
® Handle height may be adjusted to better
suit operator. (See ‘TO ADJUST HAN­
DLE HEIGHT’ in the Service and
Adjustments section of this manual).
Attach this end to shift lever
Attach this End To shift
Lever Indicator
Shift Rod Hairpin Clip
V
Shift Rod
Shift Lever
indicator