Specifications, Know your nailer/stapler, Lock-off button – Craftsman 315.114010 User Manual
Page 7: Switch, Features
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
FEATURES
SPECIFICATIONS
Motor....................................................................................................................................................................19.2 Voit DC
Switch............................................................................................................................................................. Lock-Off Switch
Staple Speed.................................................................................................................................................... 30 shots /min.
Staple Size................................................................................................................... 1/2" crown width, 1/4" to 9/16" length
Brad Size............................................................................................................................................... 18 gauge, 5/8" length
Magazine Capacity...........................................................................................................................................84 staple/brad
Charger Input....................................................................................................................................... 120 V. 60 Hz, AC only
Charge Rate.................................................................................................................................................................. 1 Hour
KNOW YOUR NAILER/STAPLER
See Figure 1.
Before attempting to use this tool, familiarize
yourself with all operating features and safety
requirements.
A WARNING: Do not allow familiarity with this tool to
make you careless. Remember that a careless
fraction of a second is sufficient to inflict severe
injury.
LOCK-OFF BUTTON
This tool is equipped with a "lock-off" button which reduces
the possibility of accidental starting. The lock-off button is
located on the handle above the switch trigger. You must
depress the lock-off button in order to puli the switch trigger.
The lock resets each time the trigger is released. Note: You
can depress the lock-off button from either the left or right
side.
SWITCH
To turn tool ON, depress the lock-off button and pull switch
trigger. Release switch trigger to turn tool OFF.
WARNING: If any parts are missing, do not operate
this tool until the missing parts are replaced. Failure to
do so could result in possible serious personal injury.