Step 26: (see figure 25 or 26), On tractors without foot rest brackets, Step 27: (see figure 27) – Craftsman 486.24838 User Manual

Page 14: Step 28: (see figure 28)

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

INSTALLING HANGER BRACKETS

For better clearance, lower the tractor's suspension arms

using the attachment tift lever.

STEP 26: (SEE FIGURE 25 or 26)
On TVactors With Foot Rest Brackets

Remove the bolt and nut that fasten the L.H. and R.H.

foot rest brackets to the frame.

* Attach the L.H. Hanger Bracket {marked ”L”) to the

inside of the tractor frame using two 3/8” x 1" carriage
bolts (K) and 3/8“ flanged nuts (BB). Bolt heads go on
inside of tractor frame. Repeat for the R.H. side.

On Tractors Without Foot Rest Brackets
• Find the empty hole beneath the foot rest. Attach the

L.H. Hanger Bracket (marked ”L”) to the inside of the

frame using a 3/8" x 1" carriage bolt (K) and a 3/8“
flanged nut (BB). Bolt head goes on Inside of tractor
frame. Repeat for the R.H, side.

INSTALLING SHOULDER BOLTS

STEP 27: (SEE FIGURE 27)

• Remove the bolt, washer and nut which fasten the

sway bar bracket to the L.H. side of the tractor frame.

Replace with a shoulder bolt (P) and a 3/8" flanged
nut (BB). Bolt goes on inside of frame.

STEP 28: (SEE FIGURE 28)

• Assembie a shoulder bolt (P) and 3/8“ flanged nut

(BB) to the R.H. side of the tractor frame, using the

first empty hole to the rear of the R.H. hanger bracket.

Bolt goes on inside of frame.