800-366-part, Positive side down – Craftsman 139.53683 User Manual
Page 2
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

PROf^RAMMING THE RECEIVER
The receiver and remote control(s) have been
factory preset with a matching code. The door will
open when you press the LARGE push button. You
can activate yoUr opener with up to eight
SECURITY4> remote controls (with blue push
buttons) and one SECURITY+ Keyless Entry.
If you purchase additional remote controls to operate this
receiver:
1. Remove the receiver actuator cover.
2. Press and HOLD the selected remote control push
button (Illustration A).
3. Then press the SRT (learn) actuator on the receiver
(Illustration B). The adjacent indicator light will
FLASH. Release the remote control push button.
The opener will now operate when either the receiver
actuator or the remote control push button is pressed.
NOTE: if the remote control push button is not held
down until the receiver indicator light flashes, the
receiver will not learn the code.
To erase ALL remote control codes from memory:
Press and HOLD receiver SRT actuator. Indicator
light alongside will glow. When the Indicator light
turns OFF (in about 6 seconds) ALL codes will be
erased.
3-Function
Remote Control
Universal Receiver
Select a rennote control push
button to operate receiver
Keep batteries away from small children,
swallowed, promptly notify doctor.
If
THE REMOTE CONTROL BATTERIES
The lithium batteries should
produce power for up to 5 years.
Replace batteries
positive side
down,
as follows: Use the visor
clip or screwdriver blade to pry
open the case as shown. To
replace the cover, insert the 3 tabs at the opposite end
and snap shut.
Open this end
first to avoid
cracking
housing
Twist
to open
REPLACEMENT PARTS
Universal Receiver (complete)..................................... 41A5041-1
When ordering parts, always provide the following
Receiver Achrator Cover............................................. ... 41A4926
information:
Remote Control Housing Only (no circuit board) ........ 41A5032
,
Product Type
•
Part Number
Visor clip .............................................................................29B134
»Model Number
• Part Description
3V 2032 Lithium Battery.......................................................10A20
(1 required for Remote Model 139.53681 B)
3V 2016 Lithium Battery...................................................... 10A19
For the repair or replacement parts you need
(2 required for Remote Model 139.53681)
Call 7 am - 7 pm, 7 days a week
1-800-366-PART
FOR REMOTE
FOR
remote
(1-800-366-7278)
MODEU3953681
MOOa 139.53681 B
114A2125C
1
1997, Sears Roebuck and Company
All Rights Reserved
Printed in Mexico