Craftsman 315.115510 - Manual (Page 6)

SYMBOLS
Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta­
tion of these symbols will allow you to operate the tool better and safer.
SYMBOL NAME DESIGNATION/EXPLANATION
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
min Minutes Time
Alternating Current Type of current
— Direct Current Type or a characteristic of current
no
No Load Speed Rotational speed, at no load
m Class II Tool Double-insulated construction
.../min Per Minute Revolutions, strokes, surface speed, orbits etc., per minute
Wet Conditions Alert Do not expose to rain or use in damp locations.
Read The Operator’s Manual
To reduce the risk of injury, user must read and understand
operator’s manual before using this product.
Q
Eye Protection
Always wear safety goggles or safety glasses with side shields and,
as necessary, a full face shield when operating this product.
A
Safety Alert Precautions that involve your safety. ®
No Hands Symbol
Failure to keep your hands away from the blade will result in
serious personal injury.
No Hands Symbol
Failure to keep your hands away from the blade will result in
serious personal injury.
#
No Hands Symbol
Failure to keep your hands away from the blade will result in
serious personal injury.
A
No Hands Symbol
Failure to keep your hands away from the blade will result in
serious personal injury.
0
Hot Surface
To reduce the risk of injury or damage, avoid contact with
any hot surface.