Clean ’n carry vac assembly – Craftsman 113.179255 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Clean ’N Carry Vac Assembly
Vac Assembly
1. Wind the electrical cord clockwise
(from the rear) around the cord wrap
area on back of vac motor assembly.
Cord
3. Place vac motor assembly onto vac
canister assembly.
Vac Motor
Assembly
Vac
Canister
2. Position the vac canister lock in the
unlock position.
4. Turn vac canister lock into locked posi-