High pressure instructions, Using soap/chemicals, Power – Craftsman 919.762000 User Manual

Page 8: Nozzle cleaning

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

HIGH PRESSURE INSTRUCTIONS

Push Nozzle Forward

for Low Pressure

Pull Back Nozzle

for High Pressure

OPEN (3/8" GAP)

to Draw Chemical

This Pressure

Washer is Preset at

the Factory to

Achieve Majdmum

Pressure at Fuii

Throttie

CLOSED (1/8" GAP)

for High Pressure

0° Degree Narrow

Spray Pattern Greatest

Cleaning Impact Turn

Counterclockwise

60° Degree Wide

Spray Pattern Great

est Cleaning Coverage

Turn Clockwise

1. The power washer spray pattern may be adjusted by rotating the nozzle head, clockwise or

counterclockwise.

2. For the narrowest spray pattern (greatest cleaning impact), rotate nozzle head counterclockwise.

3. For widest spray pattern (greatest cleaning coverage), rotate nozzle head clockwise.

USING SOAP/CHEMICALS

Excessive soap concentration does not necessarily improve cleaning

power.

NOTE: Follow chemical manufacturer’s label & safety directions!

For chemical recommendations specific to your application, contact your local

janitorial supply or chemical manufacturer.

Use EX-CELL 5000 (Formulated for EX-CELL Pressure Washers) Or Contact Your Local Janitorial
or Chemical Supplier for Recommendations for Your Specific Application.

NOZZLE CLEANING

1. Remove wand from gun by unscrewing at coupler.

2. Open the adjustable nozzle atthe end of the wand to the 0 position by

turning counterclockwise. (See Diagram 1). This will allow maximum
accessibility to clean the nozzle. Be carehji not to damage metal

spray fins.

3. insert the nozzle cleaning wire or straightened paper clip into the

nozzle orifice. Move gently in and out to clear blockage from nozzle.
(See Diagram 2).

4. Flush water through the nozzle backwards with garden hose.

Diagram 1

Nozzle Fins Open

Diagram 2

Insert Cleaning Tool