Know your edger attachment, Blade, Depth adjustment knob – Craftsman C944.511573 User Manual
Page 7: Operating the coupler, Removing attachment caution, Operation
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OPERATION
KNOW YOUR EDGER ATTACHMENT
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
EDGER ATTACHMENT, Compare the illustrations with your attachment to familiarize
yourself with the location of the various controls and adjustments. Save this manual
for future reference.
BLADE
The
BLADE
Is designed
to cut
sod.
Edger Blade
DEPTH ADJUSTMENT KNOB
The
DEPTH ADJUSTMENT KNOB is
used
to
adjust the wheel for blade
cut
ting depth.
OPERATING THE COUPLER
Your powerhead is equipped with a
coupler which enables optional attach
ments to be installed. The optional
attachments are:
Cultivator..........................71-51158
Blower.............................. 71-51160
Pruner ............................. 71-51161
Brushcutter* .................... 71-51159
*not designed for use with electric
powerheads
^WARNING: Always disconnect
powerhead spark plug (or disconnect
powerhead from power source) before
removing or installing attachments.
REMOVING ATTACHMENT
CAUTION:
When removing or instal
ling attachments, place the power-
head and attachment on a flat surface
for stability.
1. Loosen the coupler by turning the
knob counterclockwise.
Coupler
Upper Shaft
.OOSEN
TIGHTEN
Knob
2. Press and hold the locking/release
button.
Locking/Release
Button
Coupler
Lower Attachment
Upper Shaft
While securely holding the upper
shaft, pull the attachment straight
out of the coupler.