Cuisinart DCC-2200 - Manual (Page 6)

CONTROL PANEL
1. Clock Display
Displays time of day and auto on and off
times.
2. Function Knob
For setting time of day, and auto on and auto
off times.
a. Auto On
The Auto On feature is used to program
the start time of the brew cycle. The auto
on time can be set for any time, day or
night. The PM indicator is displayed on
the LCD for nighttime program times.
b. Auto Off
The Auto Off feature is used to shut off
the coffeemaker at a preset time, any-
where from 0 to 4 hours.
c. Program Set
The Program Set function is used to set
the time for the Auto On function.
d. Brew
The Brew function is used to start the
brew cycle directly.
e. Clock Set
Used to program the time of day.
f. Audible Tone (not shown)
The Brew Central ® Coffeemaker is
equipped with an audible tone which
will sound 5 times when the coffee has
completed brewing (coffee will continue
to stream from the filter for a few seconds
after tone).
3. On/Off Button
Used to turn your coffeemaker on and off;
works in tandem with the function knob.
4. Hour and Minute Buttons
For use in setting hour and minute for time
of day, auto on time, and auto off time.
5. On and Auto On Indicator Lights
6. Clean Setting
Used to indicate time to clean your
coffeemaker to remove calcium buildup.
7. 1-4 Cup Setting
For brewing smaller pots of coffee – it
provides double heating of the water, so cof-
fee is piping hot.
1
2
2a
3
2e
2d
2b 2c 4 6 7
5
5
5