CyberHome Entertainment Cyber Home CHLDV712 - Manual (Page 14)

13
Using the AC adapter
You can use the AC Power Adapter to conserve your battery life if there’s an AC Outlet nearby. Once AC Power
is applied, the unit will be in STANDBY Mode. STANDBY mode lets you awake system quickly by using the
remote control POWER Button, or the unit’s ON button.
Power Supply (1)
1
1
2
3
Connecting the AC Power Cord to the Adapter
Plug the Power Cord into the AC Adapter.
Connect the Power Plug into the Power Jack
Plug the Power Plug firmly into the DC IN 10 V Power Jack on
the Left Side of the unit.
Plug in to Wall Power Outlet
Plug the Power Cord to the Adapter and the other end of the
Power Cord into a standard wall Power Outlet.
1
2
3
Quick Tips
Ÿ Once Power is applied, the
unit will be in STANDBY
Mode. (See pg 20)
Ÿ The unit consumes 0.3W
when it is in STANDBY Mode.
Ÿ If the unit will not be used for
a long time, unplug the AC
Outlet.
Ÿ We recommend Removing
the Battery Pack when using
the AC adapter.
Right Side of Unit