Sony CPD-G200 - Manual (Page 6)

Setup
Before using your monitor, check that the following accessories
are included in your carton:
• Power cord (1)
• Macintosh adapter (1)
• Windows Monitor Information Disk (1)
• Warranty card (1)
• Notes on cleaning the screen’s surface (1)
• This instruction manual (1)
Step 1 ¡Connect your monitor to
your computer
Turn off the monitor and computer before connecting.
Note
• Do not touch the pins of the video cable connector as this might bend
the pins.
■ Connecting to an IBM PC/AT or compatible
computer
IBM PC/AT or
compatible computer
■ Connecting to a Macintosh or compatible
computer
Use the supplied Macintosh adapter.
compatible computer output
■ Connect the supplied Macintosh adapter to the computer before
cotmecting the cable. This adapter is compatible with Macintosh LC,
Performa, Quadra, Power Macintosh and Power Macintosh G3 series
computers (sold before January, 1999). If you are coimecting to a
Power Macintosh G3 series that sold after January 1999, you will need
a different adapter (not supplied). Macintosh II series and some older
versions of PowerBook models may need an adapter with micro
switches (not supplied).
Step 2: Connect the power cord
With the monitor and computer switched off, first connect the
power cord to the monitor, then connect it to a power outlet.
power cord (supplied)