Programming the wireless keyboard – Sony KI-W250 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Programming the Wireless Keyboard
The Wireless Keyboard is preset at the factory to operate Sony brand TVs.
If you have a TV other than a Sony brand that you want to control with the
keyboard, use the following procedures to program the keyboard.
1
Set the TV/WEBTV Switch to TV.
2
Find the three-digit code number for your TV from the'Trogrammable
Codes", listed on page 6. If more than one code number is listed, use the
number listed first.
3
Press the CODE SET button.
4
Enter the three-digit code number.
5
Press the Return key.
To Check if the Code Number Works:
Aim the keyboard at your TV and press the TV (POWER) button.
If the TV responds, try the CH+ and CFT buttons. If the TV: responds, yodre
done. If the code doesrft work;
□ Try programming the remote using the other codes listed for your TV
brand.
□ If you cannot get your TV to respond to the Keyboard- even after trying all
the code numbers for your TV- call T888-772-7669.
Note
Your TV must have infrared ( I R ) remote control receiving capability in order to be
used with the Wireless Keyboard.