Country Flame FP42 - Manual (Page 12)

Chapter 1
WHAT’S INCLUDED WITH YOUR SMART FIREPLACE?
Unpack all material provided with the Country Flame product. Important materials and small
components are located inside the fireplace furnace. Ensure that every item listed below is
present during the unpacking process. If you find extra items or believe some items are missing,
please contact your Country Flame Dealer, Distributor, or Country Flame to verify and obtain all
parts necessary for proper installation. The installation of this fireplace is to be in accordance with these
instructions and local codes. Any changes, alterations, misuse, or the placing of combustibles closer than
specified tolerances will void the warranty. Following are the items provided with each Smart Fireplace
Furnace:
ITEM DESCRIPTION QUANTITY PROVIDED
FIREPLACE FURNACE 1
525 CFM (cubic feet per minute) Blowers, 120 Volt AC, 6.5 Amps, 60 Hz 2
Blower Mounting Frames 2
Air Intake Grilles (13.5” by 13.5”) 2
Air Intake Grille Frames (13 ¼” by 13 ¼” by 4 1/2 ”each) 2
Blower Speed Controls mounted on Air Intake Grilles 2
Heat Discharge Grilles (5.25” by 30.975”) 1
Heat Discharge Boot Assembly 1
Ash Dump Cover 1
Ash Dump Clean-Out Door Assembly 1
Ceramic Air Discharge Snap Disc (110 degrees Fahrenheit) 1
Wall Thermostat (120 Volt AC) 1
Rotary Damper Control Assembly 1
Fiberglass Insulation Roll (4’ wide by 15’ long by 2” thick) 1
Bag, miscellaneous screws and electrical components 1
Version 7.1
1