Sony XR-C7200 - Manual (Page 10)

Changing the sound and
display settings
You can set:
• Clock (page 5)
• D. Info (Dual Information) to display the
clock and the play mode at the same time
(ON), or to display the information
alternately (OFF).
• Dimmer (Dimmer) to change the brightness
of the display.
— Select "Auto" to dim the display only
when you turn the lights on.
— Select "on" to dim the display.
• Contrast to adjust the contrast if the
indications in the display are not
recognizable because of the unit's installed
position.
• Beep to turn on or off the beeps.
- • RM (Rotary Commander) to change the
operative direction of the controls of fhe
rotary commander.
— Select "norm" to use the rotary
commander in the factory preset position.
— Select "rev" when you mount the rotary
commander on the right side of the
steering column.
• Loud (Loudness) to enjoy bass and treble
even at low volume. The bass and treble will
be reinforced.
• A, Scrl (Auto Scroll)
Note
The riisplai/ed item will differ depending on the source.
1 Press (SHIF=T). then press CD (SET UP).
2 Press CD (SET UP) repeatedly until the
desired setting mode appears.
Each time you press CD (SET UP), the item
changes as follows:
Clock —► D.Info —» Dimmer —» Contrast —*
Beep —► RM —► Loud —r A.Scrl
3
Press CD {—►) to select the desired
setting (for example: “on" or "off").
For the "Contrast" setting, pressing
CD
(—►) makes the contrast higher, and
pressing
CD (■<—) makes the contrast lower.
4 Press (SHIFT).
When the mode setting is complete, the
normal playback mode appears.
With Optional Equipment
CD/MD Unit
Playing a CD or MD
1 Press (SOURCE) repeatedly to select the
CD or MD.
2 Press (MODE) until the desired unit
indication appears in the dispiay.
CD/MD playback starts.
Changing the displayed item
Each time you press ( DSPL) during CD / MD
playback, the item changes as follows:
Elapsed playback time
i
Disc name*'
i
Track name*"
Clock
10
*’ If you have not labeled the CD, "NO Name" appears in
the display. If there is no prerecorded name for an MD,
"NO D. Name" appears in the display.
If the track name of an MD is not prerecorded, "NO T.
Name" appears in the display.
Tip
If the name of the MD is too long, you can scroll it across
the display by pressing
then (T) (■*—).
Automatically scrolling a disc naipe
— Auto Scroll
If the disc name or track name on an MD
exceeds 10 characters and the Auto Scroll
function is on, the name automatically scrolls
on the display as follows.
• The disc name appears when the disc has changed (if the
disc name is selected).
• The track name appears when the track has changed (if
the track name is selected).
• The disc or track name appears depending on the setting
when you press (SOURCE) to select an MD.
If you press ( DSPL) to change the display
item, the disc or track name of the MD is
scrolled automatically whether you set the
function on or off,
1 Press (SHIFT), then press CD (SET UP)
repeatedly until "A. Scrl" appears.
2
Press CD
(—►)
to select "A. Scrl on."