Sony KV-27TS20 - Manual (Page 9)

When you connect both VHF and UHF antennas
Use the optional EAC-66 U/V mixer.
1 Prepare the VHF antenna end using the appropriate
connector.
2 Connect the cables to the mixer.
3 Plug the mixer to VHF/UHF.
UHF VHF
When the U/V mixer is used
Snow and noise may appear in the pictures of the cable TV
channels over 37 (Wh 1).
If the supplied antenna connector has a slot as illustrated
below:
The antenna connector can be used as a U/V mixer.
When connecting both 75-ohm VHF and 300-ohm UHF
antennas, or 300-ohm UHF antenna only:
To turn the slot, i . jso u com or a similar ob|Oci
9