Sony CPD-15SF1 - Manual (Page 3)

—
A
Table of Contents
Introduction.............................................................................. 3
Precautions...............................................................................3
Getting Started.......................................................................... 4
Using Your Monitor................................................................... 4
Preset and User Modes...........................................................4
Adjustments..............................................................................5
Normal Operation Mode..........................................................5
Adjustment Mode................................................................... 5
Entering New Timings............................................................... 6
Power Saving Function............................................................. 7
Specifications........................................................................... 7
Use of the Tilt-Swivel................................................................. 7
Troubleshooting........................................................................8
J
Introduction
Congratulations on your purchase of a Sony Multiscan ISsff
17sfl
This monitor incorporates over 25 years of Sony experience
with Trinitron display technology, ensuring excellent
performance and outstanding reliability. The Multiscan 15sV
17sfs wide scan range (31.5-64 kHz), together with Digital
Multiscan Technology, allow it to sync to any video mode
from standard VGA through 1024 x 768 at 76 Hz (1280 x
1024 at 60 Hz). In addition, its two factory preset color
modes and one user adjustable color mode gives you
unprecedented flexibility in matching on-screen colors to
hard copy printouts. Furthermore, the Multiscan 15sf/17sf
features digital controls, raster rotation, power saving, low
emissions, and much more. All together, it delivers
incredible nerformance with the quality and support you can
expect froin a Sony.
Precautions
Installation Warning on Power Connection
Prevent internal heat build-up by allowing adequate air
circuiation. Do not place the unit on surfaces (rugs,
biankets, etc.) or near materials (curtains, draperies) that
may block the ventilation holes.
Do not instedi the unit near heat sources such as radiators
or air ducts, nor in a place subject to direct sunlight,
excessive dust, mechanical vibration or shock.
Do not place the unit near equipment which generates
magnetism, such as a converter or high voitage power
iines.
Maintenance
Ciean the cabinet, glass panel and controls with a soft cloth
lightly moistened with a miid detergent solution. Do not use
any type of abrasive pad, scouring powder or solvent, such
as alcohol or benzine.
• Use the supplied power cord.
For the customers in U.S.A.
If you do not do this, this monitor will not conform to
mandatory FCC standards.
for
too
to 120 VAC for 220 to 240 VAC
Before disconnecting the power cord, wait for at ieast
30 seconds after turning off the power switch to allow for
the discharging of static electricity on the CRT display
surface.
After the power has been turned on, the CRT is
demagnetized for approximately 5 seconds. This
generates a strong magnetic field around the bezel which
may affect the data stored on magnetic tape or disks near
the bezel. Place such magnetic recording equipment and
tapes/disks at a distance from this unit.
The socket-outlet shall be installed near the equipment
and shall be easily accessible.________________________