Chauvet TFX-950CM - Manual (Page 11)

Operating Instructions
TFX-950CM User Manual 11
Revision: 2006-01-20/16:37
Mode
T FX -32F
T FX -3 2 CON
STAND-BY FUNCTION MODE
TFX- WF S
TFX-SWF Easy Controller (Optional)
The TFX-SWF Foot Controller is used only in master/slave mode. Connect the 8-pin connector of the
foot controller into its respective connector on the first unit in the daisy chain. The table below
describes the functions of the TFX-SWF Controller.
TFX-SWF BUTTONS
Stand By Mode Function
Blackout Auto
Led 1: Off
Led 2: Off
Fixtures will run built in programs
automatically
Audio
Led 1: Off
Led 2: On Fixtures will run built in programs to
the sound.
Manual
Led 1: On
Led 2: Off Full/CB:
Hold: pedal to set to Full On
Bump: Pedal to set dimming levels
Manual
Led 1: On
Led 2: On Full/CB:
Hold: pedal to set dimming levels
Release: Pedal to set to Full On
TFX-CONPK Stage Wash
™
Controller Pack (Optional)
The TFX-CONPK is a package that includes the TFX-32CON which is an enhanced dedicated
controller for the TFX-950CM, TFX-64CM and TFX-1550CM fixtures. The TFX-32F foot controller is
also included for hands-free operation.
The TFX-32CON provides the following features:

9 different hold-color buttons for
immediate color access

fader access to 40 predefined
mixed colors

fade time control

12 different chase patterns to
choose from

chase speed control

master dimmer level

blackout button

full on button

sound button
The TFX-32F provides the following features:

Selectable modes:
1. Blackout
2. Color Hold
3. Chase

Up and down pedal buttons select
colors and chase patterns
Please refer to the TFX-32CON and TFX-32F user manuals for more in depth information.
TFX-SWF Foot Controller