SONiVOX Vocalizer Pro - Manual (Page 15)

15
Modulation Tab
Vocalizer Pro has four Spectral Synthesis
Modules (A1, A2, B1, and B2), each with
multiple envelopes and LFOs (low-frequency
oscillators). You can freely adjust the
envelopes, LFOs, and other parameters to
change the characteristics of the incoming
audio signal, whether it's a voice or instrument.
You can also easily adjust the routing between these modules, creating even more
combinations of possible sounds.
Spectral Synthesis Types
Each module has a Type drop-down menu in its upper left corner. Use these
Types to determine the module's overall behavior when processing incoming
audio.
•
Normal Types are indicated by an N prefix.
• Turbo Types are indicated by a T prefix. These Types are more "excitable" and are
typically louder than Normal Types.
• The number (1-8) next to the letter indicates the amount of harmonic noise added to the
signal.
• Thru allows audio to pass through the module normally while permitting use of its filter
settings.
• Byp allows audio to bypass the module entirely.
Like other module parameters, envelopes, etc., these Types are saved within the Preset and
Snapshots.