Scilogex MX-F - Manual (Page 8)

6
MX-S(F) Vortex Mixers （Adjustable and Fixed Speed Models）
Note:
• Place vessels such as a test tube as vertical as
possible into the centre of the mixing head in
order to mixing smoothly.
• Adjust the speed control knob slowly in order
to have the instrument work smoothly.
6 Maintenance and cleaning
• Proper maintenance can keep instruments working in a
good state and lengthen its life time.
• Be careful not spray the cleanser into the instrument when
cleaning.
• Unplug the power line when cleaning.
• Only use cleanser that we advised as below:
Dyes Isopropyl alcohol
Construction materials
Water containing tenside /
isopropyl alcohol
Cosmetics
Water containing tenside /
isopropyl alcohol
Foodstuffs Water containing tenside
Fuels Water containing tenside
Table 2
For materials which are not listed, please request information
from manufacturer.
• Before using other method for cleaning or decontamination,
the user must ascertain with the manufacturer that this
method does not destroy the instrument.
• Wear the proper protective gloves during cleaning of the
instruments.
NOTE:
• Electrical instruments may not be placed in the cleansing
agent for the purpose of cleaning.
• The instrument is a sophisticated electronic products,
avoiding severe shake in work and transportation
• The instrument must be cleaned and put it into the initial
packaging carton before sending to service for repair,
avoiding the contamination of hazardous.
• Switch OFF the instrument and put it in the dry, clean,
stable place at room temperature in long-term disuse.
7 Associated standards and regulations
Construction in accordance with the following safety
standards:
EN 61010-1
Construction in accordance with the following EMC
standards: