Scilogex MS7-H550-S - Manual (Page 9)

7
LED Digital 7” Square Hotplate Stirrer
Warning !
Forbid to transfer the vessel when the instrument
working.
6. Working with external
temperature sensor (Hotplate
Model)
Figure 7
The external temperature sensor PT1000 is the
Manufacture’s standard accessory. If the sensor is plugged
in and rotate the heating knob, LED displays the
temperature setting value and shifts to real value in 5
seconds. Safe circuit controls hotplate temperature.
Comparing with the temperature control of the hotplate, the
external temperature sensor can control the medium’s
temperature more precisely.
If external temperature sensors needed, it must be plugged
in before the device is switched ON. Ensure the external
temperature sensors connecting firmly and to be inserted in
the media before heating. The heating function will be
stopped automatically under abnormal conditions. Please
operate follow the instructions below:
•
Switch OFF the instrument.
•
Ensure the external temperature sensors is inserted in
the media heated.
•
Switch ON the instrument and run heating function.
If the heating function did not work, please contact
manufacturer/supplier for technical support.
Warning !
Forbid to plug in/pull out external temperature
sensor in heating.