Scilogex MS-M-S10 - Manual (Page 7)

5
MS-H(M)-S10 10-Channel Analog (Hotplate) Magnetic Stirrer
4 Trial run
• Make sure the required operating voltage and power
supply voltage match.
• Ensure the socket must be earthed.
• Ensure the power be off and the speed control knob and
the temperature control knob at the lowest position
• Plug in the power cable，ensure the power be ON（Figure 3）
• Add the medium into the vessel with a stirring bar.
• Put the vessel above spots on the plate.
• Turn the speed control knob slowly to the ideal scale
• Turn the temperature control knob slowly to the ideal
scale（MS-H-S10）
• Keep the temperature control knob and the speed control
knob slowly to the lowest position to turn off the function.
If these operations above are normal, the device is ready
to operate. If these operations are not normal, the device
may be damaged during transportation, please contact
manufacturer for technical support.
5 Control elements
Speed control knob
Power
LED
Temperature control knob
(MS-H-S10)
working plate
Stirring point
Figure 2
Figure 3
Items Descriptions
Speed control
knob
Set the rated rotary speed in the safe
stirring range from 0 to 1100 rpm. The
function “Stirring” is switched ON
or OFF via the knob.
Temperature
control knob
（
MS-H-S10）
Set the rated temperature in the
safe temperature range from room
temperature to 120℃. The function
“
heating” is switched ON or OFF
via the knob.