Reizen Big Button Speaker Phone - Manual (Page 3)

RECEIVER VOLUME CONTROL
The sound level of receiver can be justify by handset switch from "HI" to "MI" or "LO".
LAST NUMBER REDIALING
The last number you called can be redialed automatically. This is useful especially if
lines is busy.
1. Get a new dial tone and press the HOOK SWITCH or hang up the phone for 2 seconds.
Then press REDIAL. This phone will remember the last number dialed even overnight.
(If you do not want anyone to know which number you dialed last, pick up the phone
and press any number)
FLASH BUTTON
When in an office equipped with PABX, your unit makes it easy to transfer calls.
• Ask calling party to wait.
• Press and release FLASH button.
• Dial number to which call is intended.
• When the party answers, announce the call and hang up.
If you receive a busy or no answer:
• Press and release FLASH button to re connect to calling party.
TO STORE 3 ONE TOUCH (MI/M2/M3)
1. Lift the handset
2. Press STORE button
3. Enter the number you want to store
4. Press ONE TOUCH button (MI/M2/M3)
5. Replace the handset
TO STORE 10 MEMORIES
1. Lift the handset
2. Press STORE button
3. Enter the number you want to store
4. Press STORE button
5. Press a number from 1 to 0 (Where you would like you number stored)
6. Replace the handset
TO DIAL A NUMBER FROM 3 ONE TOUCH (Ml/M2/M3) MEMORIES
Get dial tone (by picking up handset) and press on of the 3 buttons marked with,
the symbols (MI/M2/M3)
TO DIAL A NUMBER FROM MEMORY
1. Lift the handset.
2. Press AUTO and numerical button in which the number you want to dial is stored.
The unit will dial the number stored in the memory your selected automatically.