QHYCCD QHY8L User Manual

Page 5

Camera Software Installation

Please download last QHY8L system driver from

http://www.qhyccd.com/download.html

(WINUSB

64/32version) This version support
windowsXP,windowsVista and windows 7, 64 and
32bit version.

Run installer。

Connect the camera to computer with USB calbe.
Do not connect 9pin power cable this time

System will find new device. Wait till installation
finished(In XP select “No”->”Next Step”->”Install
automaticly”

After successfully installed, the LED of camera will
flash.

Download and run the the driver version detector
software from

www.qhyccd.com/download.Html

Click QHY8L button.Check if it the installed driver
the lastest version

Use 9pin power cable connect DC201 and QHY8L.
Please note the side with EMC ring should connect
to DC201

Connect DC201 with 12V input. The LED of
DC201(+15,-15.+5) should be on

Download

EZCAP

software

from

http://www.qhyccd.com/download.Html

Click “scan

camera” from main menu. The QHY8L will be
highlight. Check it on.

Check if DC201’s FAN and TEC LED on and check
if the fan of QHY8L running.