Products & accessories, Full enclosure wall bracket, 25’ extension lead – PulseTech X2 Xtreme Charge 2-Station Battery Charger, Maintainer & Desulfator (100X200) User Manual

Page 8: Quick battery tester, Battery lead with clips, Leave-on” battery lead with lugs, 12v xtreme charge, W/pulse maintenance, 12v 2-channel charger w/pulse maintenance, Quick mount wall bracket

PRODUCTS &

ACCESSORIES

Full Enclosure Wall Bracket

Black powder coated 16-gauge
steel full enclosure designed to
suit heavy-duty, semi-permanent mount-
ing requirements as needed. For XC100-P only.

Part #: 100X810

Model: XC-BKT

To purchase any of these
items, contact an authorized
Xtreme Charge

dealer, visit

www.PulseTech.net or call
800-580-7554.

25’ Extension Lead

Extend a standard lead by 25
feet with this extension. It fea-
tures quick-disconnect termi-
nals on both ends. Lead is 25 feet long.

Part #: 100X825

Model: XC-EXT-25

Quick Battery Tester

Assess your 12-volt battery’s
health quickly with this pocket-
sized tester. It will be the most
used tester in shops, garages
and any areas where battery
checks are performed.

Part #: 100X822

Model: XC822-TEST

Battery Lead with Clips

This 7.5-amp fuse-protected
cable is supplied with a quick-
disconnect terminal. Lead is 2
feet long.

Part #: 100X827

Model: XC-CLIPS

“Leave-On” Battery
Lead with Lugs

Xtreme Charge

7.5-amp

fuse-protected cable comes
with a quick-disconnect termi-
nal. Lead is 2 feet long.

Part #: 100X830

Model: XC-LUGS

12V Xtreme Charge

w/Pulse Maintenance

Ideally suited for AGM and
Maintenance-Free batteries.
Increases the duty and life
cycle of all 12V batteries up
to five times longer.

Part #: 100X010

Model: XC100-P

12V 2-Channel Charger
w/Pulse Maintenance

Double the charging capa-
bilities of the popular
XC100-P Xtreme Charge

12V Battery Charger. Each
station charges at a 2.5 A
(5 A effective) charge rate at over 14.8 V.

Part #: 100X200

Model: X2

Quick Mount Wall Bracket

Black powder coated 20-gauge
steel. “Quick Mount’ flex design
for easy clip in and out use. Clip into
the wall bracket for shop use or un-clip it and
take it with you as needed. For XC100-P only.

Part #: 100X808

Model: XC-QM

QuadLink

4-Channel Battery
Charger Multiplier

Gives your existing 6V or
12V charger, no matter what the
brand, the ability to charge up to FOUR batter-
ies at once.

Part #: 100X004

Model: XC-QL4

998XM202 04/12