Pro-Ject Audio Systems Pro-Ject Debut III/Phono USB User Manual

Page 6

Connecting to a Computer (Windows XP

operating system)

1. Connect the USB-output of the Debut III/Phono USB to a free USB-socket on your computer and
turn it on/make sure it is powered on.

Please note: Connection should be made to an USB-socket of your computer directly. Connecting to
USB-hubs or switches can cause problems.

2. The “new hardware found assistant“ will automatically detect the unit and announces it as a “USB audio codec”.

3. open the System menu via “Start“ (Windows key)
 Settings


Control Panel



Sound and Audio Devices

4. In the control panel open the
“Sound and audio“ menu.

5. In the Sounds and Audio panel select the Audio
tab. In the Replay section select your sound card
from the pull-down lists (usually preselected).

6. Select the USB Audio CODEC from the pull
down list in the Recording section. Make sure
your sound card is selected for Replay.

7. Confirm your selections by clicking the OK button.

8. Close the control panel windows and start your recording programme.