beautypg.com

Pro-Ject Audio Systems Pro-Ject Signature 12 User Manual

Page 13

background image

2.

Setting the vertical tracking force (VTF)

Place counterweight halfway along the counterweight support rod, being sure to have the locking screw

uppermost. With the power of and platter static, place the stylus pressure gauge onto the platter. To set the

required VTF place the tip of the stylus on the pressure gauge. Moving the counterweight towards the cartridge

will reduce VTF and away will increase VTF. In order to avoid the damage oh the cartridge be sure that all time

all the cartridges movements must be done in upper tonearm lift position. Repeat the measuring procedure

until you get the correct VTF.

Adjust the VTF prior to installing the anti-skating weight.

See also other documents in the category Pro-Ject Audio Systems CD-players: