Potential incorrect use and fault conditions, Service, Warranty – Pro-Ject Audio Systems Record Box USB User Manual

Page 4: Copyright, trademarks

Potential incorrect use and fault conditions

No signal on one or both channels:

No connection between player and phono amplifier ore amplifier. This could be due to a faulty plug,

broken wire or solder joint or simply loose plug/socket connection.

Strong hum:

No earth connection from cartridge or arm or arm cable to phono amplifier, or earth loop.

Service

Should you encounter a problem which you are not able to alleviate or identify despite the above information,
please contact your dealer for further advice. Only when the problem cannot be resolved there should the
unit be sent to the responsible distributor in your country.

Warranty

The manufacturer accepts no responsibility for damage caused by not adhering to these instructions

for use. Modification or change to any part of the product by unauthorized persons release the

manufacturer from any liability over and above the lawful rights of the customer.

Pro-Ject Audio Systems is a Registered Trademark of H.
Lichtenegger.

This guide was produced by: Pro-Ject Audio Systems
Copyright

The information was correct at the time of going to
press. The manufacturer reserves the right to make
changes to the technical specification without prior
notice as deemed necessary to uphold the ongoing
process of technical development.

Windows XP

, Windows Vista

®,

Windows 7

and Windows 8

are trademarks of the Microsoft group of

companies. Mac

and Mac OS

are trademarks of Apple Inc., registered in the U.S. and other countries.

Dolby

is a registered trademarks of Dolby Laboratories. DTS

™

is a registered trademark of DTS, Inc..