Pro-Ject Audio Systems Speed Box DS User Manual

Page 4

Technical specifications Pro-Ject Speed Box DS

Nominal

speeds:

* 33 and 45 r.p.m. ** Optional 78 r.p.m.

Quartz oscillator:

Speed stability ± 0,001%

Pitch control:

±20 steps/0,1 r.p.m.

*** Length power cable:

approximately 40cm

Turntable connection:

16V/AC 190mA max. (3W power consumption max.)

120V model only:

120V/AC 25mA max. (3W power consumption max.)

230V model only:

230V/AC 13mA max. (3W power consumption max.)

Outboard power supply:

18V/1.000mA DC, suitable for your country's mains supply

Dimensions W x H x D (D with sockets): 103 x 72 x 144 (144)mm
Weight:

1.360g without power supply

Service

Should you encounter a problem which you are not able to alleviate or identify, please contact your dealer for
further advice. Only when the problem cannot be resolved there should the unit be sent to the responsible
distributor in your country.

Warranty

The manufacturer accepts no responsibility for damage caused by not adhering to these instructions

for use. Modification or change to any part of the product by unauthorized persons release the
manufacturer from any liability over and above the lawful rights of the customer.

PRO-JECT is a Registered Trademark of H. Lichtenegger.

This guide was produced by: Audio Trade GmbH

The information was correct at the time of going to
press. The manufacturer reserves the right to make

changes to the technical specification without prior
notice as deemed necessary to uphold the ongoing
process of technical development.