Front panel controls and indicators, Service, Warranty – Pro-Ject Audio Systems Power Box RS Phono User Manual

Page 3: Copyright, trademarks

Front panel controls and indicators

Toggle switch on the left side will enable or disable output socket with 2x18V. The blue LED above the switch
shows that the socket is active.

"Charging" is illuminated when batteries are charged.

"Mains" is illuminated when the unit is connected to the mains.

Technical specifications Pro-Ject Power Box RS Phono

Output voltage:

from +/-14,8V to +/-16,8V, depends on battery charge level

Battery type and capacity:

Li-ion, 2000mAh

Charging time:

approx. 4 hours (longer when Phono Box RS in use)

Battery playing time:

approx. 4 hours

Power supply:

20V/3A

Dimensions W x H x D:

201 x 72 x 195mm

Weight:

2030g

Service

Should you encounter a problem which you are not able to alleviate or identify despite the above information,
please contact your dealer for further advice. Only if the problem cannot be resolved there, the unit should
be sent to the responsible distributor in your country.

Warranty

The manufacturer accepts no responsibility for damage caused by not adhering to these instructions
for use. Modification or changes to any part of the product by unauthorized persons release the
manufacturer from any liability over and above the lawful rights of the customer.

Pro-Ject Audio Systems is a registered Trademark of

H. Lichtenegger.

This guide was produced by: Pro-Ject Audio Systems
Copyright

The information was correct at the time of going to
press. The manufacturer reserves the right to make

changes to the technical specification without prior
notice as deemed necessary to uphold the ongoing
process of technical development.