Pro-Ject Audio Systems CD Box SE User Manual

Page 4

Front panel controls

To switch on from standby or to standby

The button A will toggle the player between its fully operational status and standby. The display shows

STANDBY when the unit is in standby.

Inserting and ejecting a disc

Switch the unit on from standby. Insert the disc into the slot, with the label side facing upwards. The slot-loading
mechanism will load the disc automatically. The display shows the total number of tracks on the disc and the

total duration of the disc.
F stops playback and ejects the disc.

Dimming the display

Press and hold the buttons D and E will change the display brightness - full, half and one third.
To access that function, playback must be stopped.

Play

Pressing C starts playback of the first track. The display shows the current track number, the elapsed time of
the current track and the play icon.

Pause

C pauses playback. The display shows the current track number, the elapsed time of the current track and
the pause icon.
To resume playback press C again.

Stop

D stops playback. The display shows the total number of tracks on the disc, the total duration of the disc and

the stop icon.

Stepping between tracks

Press the buttons B (previous track) or E (next track).
Pressing B while playback, the current track starts playing from the beginning.
The display shows the number of the tracks as you step, the elapsed time of the current track and the step icon.

Scanning through the disc

Press and hold the button B (fast backward) or E (fast forward) to scan through the disc. The display shows
the current track number, the elapsed time of the current track and the scan icon.
Releasing B or E will take you back to playback.