Important notice – Pro-Ject Audio Systems Bluetooth Box E User Manual

Page 2

Dear music lover,
thank you for purchasing a Pro-Ject Audio Systems Bluetooth Box E.
In order to achieve maximum performance and reliability you should study these instructions for use

carefully.

Warning of a hazard for the user, the unit or possible misuse.

Important notice.

Safety instructions

AC outlet voltages vary from country to country. Before connecting to the mains, make sure that
the voltage in your area meets the voltage requirements printed on the power supply.
The power supply is used to disconnect the unit from the mains. Make sure that the power supply is
easily accessible at all times. Never handle the device, the power supply while your hands are wet or
damp.
Avoid letting liquids enter the device or the power supply. Never place any item containing liquid,
such as a flower vase on or near the device. Never spill any liquid on the device or the power
supply. Never place any naked flame sources, such as lighted candles on or near the device. The product
shall not be used in damp or wet locations, next to a bathtub, sink, swimming pool or any other similar
conditions.

Connectors

Make all connections whilst the converter is disconnected from the power supply.
Take care to connect the left and right channels correctly. The right channel is usually marked red,
the left channel black or white.
Never use any other power supply than the one supplied with the unit.

Connection to the amplifier

Connect the Analog Out socket to a line input (such as AUX) on your amplifier. Alternatively you can use

also digital Optical Out to connect the unit to a D/A converter or to digital input of your amplifier or AVR.

Mains power connection

Connect the low voltage plug from the power supply to the Power5VDC socket before connecting the

power supply to the mains.

Bluetooth pairing

Pairing with Android devices